domingo, 31 de julio de 2016

Single phase electrical meter two-wire electronic CHINT DSS666

Monofasic two-wire electronic meter DSS666 CHINT

Longtime I have this meter and I decided to use it to integrate either with Arduino or ESP8266 and record data in the Emoncms platform (OpenEnergyMonitor).

It allows measurement energy Active or Active Power in home installations.

Cyclometric recorder, recording and always positive measures preventing fraudulent losses connections.

Since this is an invasive meter that is required to open our electrical circuit pulses generated is captured, Genera 3200 imp / kWh which will allow us to measure the power and power consumption.

The meter has an optocoupler to isolate the pulse output to take the measurement.

from wikipedia

Measurement mode Single Phase Phase-Neutral

Important:

To make the manipulation of these teams should have extensive knowledge of electrical systems and electric installation.

Important features:

Measurement network low voltage

Measurement System 1 Phase 2 Wire

Nominal voltage 120VAC

Base current 5A - 10A

Starting Current 20mA

Maximum current 60A - 100A

Local Regulations regarding accuracy Class 1 (IEC 62053-21 NTC 4052)

Calibration Led indicator Diode

Consumption voltage 0.4W / 4 VA

Current consumption 0.1VA

Detailed video CHINT DSS666

Other Power Meter

Akw5112 KW4 EcoPower meter RS485 Modbus RTU and Simulator
AKW4 Panasonic

Reference:

Flashing-LED-on-Electricity-Meter

lindnilsson.dk-powermeter

More Info:

Blog PDAControl English

Blog PDAControl Español

Youtube Channel

PDAControl

viernes, 13 de mayo de 2016

Emoncms OpenEnergyMonitor

wifi Unknown 10:24:00 a.m.

It is a project in development based on open source developed by Trystan Lea, this application has tools for measuring energy or electricity consumption, mixing hardware and software which is available to anyone who wants to start measuring and regulation of energy consumption the purpose of this project is sustainable development.

Arquitecture Openenergy Monitor

You have the ability to create your own hardware and adapt or contribute to the development of software compatible with Arduino and Raspberry Pi,

Implements the measurement and monitoring of variables atravez hardware nodes implementing opensource

It has a management income users with login and password

sending data is encoded with a unique key to avoid collisions Notifies the updating of variables, graphs indivisuales, comparative It has a great tool dashboards equivalent to a scada interface

Oficial Sites

Emoncms

Emoncms is a powerful open-source web-app for processing, logging and visualising energy, temperature and other environmental data. Openenergymonitor

Hardware Emoncms

All our hardware units are fully open-source and based on Arduino. Firmware sketches are available open-source on GitHub. See Resources for info on how to setup Arduino IDE.

Step by Step Installation Emoncms in Windows 7

Install Emoncms on Windows Part 1